General Information on Our Training Courses


Price List for MGT Inc. In-Plant Courses
Effective January 1, 2005

Note: Prices are subject to change without notice

The following are charged on a "cost pass-through" basis, with no mark up:

  • Travel expenses
  • Travel insurance
  • Suitable Lodging
  • Meals
  • Car rental
  • Costs incidental to travel
  • Costs of freight for shipping course notes to destination.

The following are based upon the purchasing firm's providing all necessary facilities to enable the course to be presented. These include:

  1. dedicated presentation room
  2. projector for attachment of MGT laptop or client desktop PC with infrared remote and suitable screen for Power Point presentation
  3. necktie microphone and audio equipment
  4. video monitor and VHS video cassette recorder for 1/2" tape
  5. easel and flip chart or blackboard and eraser
  6. identification badges for participants
  7. meals and refreshments for presenters and participants
  8. translator personnel and audio equipment for participants and presenter in locations where required

Fees include one bound set of copyrighted course notes for each participant.

 
Course Length
  One Day Two Days Three Days
One-instructor courses:
1Shell-and-Tube Heat Exchangers-Mechanical Aspects; Tube-to-Tubesheet Joints; and Guidelines for Replacement Tubular Heat Transfer Equipment; Performance Testing of Feedwater Heaters; Introduction to Heat Transfer.
8 (min) to 10 participants $4,835 $6,500 $8,900
Per additional participant
(Maximum of 30) 		$190 $290 $390

Two-instructor course:
1Closed Feedwater Heaters; 1,2Inspection, Maintenance and Repair and Life Extension of Tubular Heat Exchangers.
8 (min) to 15 participants NA NA $11,475
Per additional participant
(Maximum of 30)		 NA NA $500


1Four-day presentations of these courses are available. The Shell-and-Tube and Closed Feedwater Heater courses include an optional fourth-day shop tour. The Inspection, Maintenance and Repair course includes an optional fourth day of presentations by suppliers of Inspection, Maintenance and Repair equipment and services. Prices for these options are $10,855 for the Shell-and-Tube course + $490 for each participant after the tenth, and $14,565 for the Closed Feedwater Heater and Inspection, Maintenance and Repair courses + $600 per additional participant after the 15th.

2This course can be adapted to the purchasers needs. It can be modified to cover only feedwater heaters and auxiliary exchangers used in power generation or to apply to exchangers used in oil refineries, petrochemical and/or chemical plants.